Pool cleaning is very important in order to use swimming pools in a healthy way and to get 100% efficiency. The dirt and dust formed on the water surface must be purified from the pool. In addition, many microorganisms that come from the human body or are transmitted externally due to environmental factors pose a threat to human health.
What are the Causes of Pollution of the Pool?
Hygiene problems are inevitable in pool environments where the necessary physical and chemical conditions are not met. If the necessary maintenance is not done for the cleaning of the pool, the formation of bacteria and viruses begins in the pool. Over time, algae may occur on the pool walls, and the color of the water turns green and becomes cloudy. The active substances affecting the pollution of the pool are as follows, respectively;
Algae:
The main reason for the pool walls to become algae is due to the fact that the impurities in the water are not separated from the water. In other words, particles spilled from the human body, disease-causing pathogens and algae spores from the environment, etc. algae is observed due to reasons.
Environmental Factors:
Especially in open pools, the surface of the pool water is polluted due to the environmental factors triggered more. For example, dust and insects blown by the wind can fall into the water.
Human Factors:
Various particles may disperse into the pool on people, and there may be situations such as hair, hair, sand or local pool pollution that may be caused by children.
How often is it necessary to change the pool water?
It is recommended to change the water of personal pools every 3 days during the summer months. After the chlorination process, the pool water should not be entered for 3 hours. Since the water amounts of the operating pools are 2,000, 3,000 tons of water, it is a long time-consuming and costly task to completely empty and refill the pool water. For this, 5-6%, ie 120-125 tons of water, is drained according to the volume of the pool water and fresh water is added instead. Then pH measurement is done twice a day. In addition, the skimmers in the pool constantly filter the pool water. Apart from this, the pool water should be drained annually or every 6 months and fresh water should be added.
What are the Points to Consider in Cleaning the Pool?
The clearness of the pool water is the most important indicator of its cleanliness. While chemicals and filters may help with clarity, they may not be enough. There are some basic factors that need to be done for this;
Pool floor and walls should be cleaned with pool bottom cleaning motors.
Pool filters should be washed daily with the backwash method.
The bristle catcher in the pool circulation pump should be emptied every 2 weeks.
The filtration system must always be in working condition.
Chemical measurements of pool water should be measured daily.
The use of unknown products should be avoided.
The pH level should be in the range of 7.4-7.6.
3 Comments
Jhon Miller
I would like to recommend their services for those who era experiencing technical issues and who would like to upgrade what they currently have
Martin Moore
I liked the information that is listed in your blog articles a lot!
Melissa Hunter
Thank you for your feedbacks!